School bus yellow, that should say it all. Quite a dark yellow with good depth of color. This is the color that brings joy and delight and it will really show in your prints!
Tips & Tricks
Advised 3d printing temperature:
220-240C
Advised 3d print speed:
40 - 70 mm/s
Advised Heated bed
75-85C
Build Platform
nGen gives the best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
Specifications
Material:
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density:
1.20 g/cm3
Glass Transition Temperature:
85C