NGEN CLEAR is neutral from color and completely transparent. So if your 3d print project requires some transparency then should give NGEN CLEAR a try, it is as transparent as any filament can get.
Tips & Tricks
Advised 3d printing temperature:
Advised 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives the best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
± 0.05 mm
Glass Transition Temperature: